New technology in breaking off wifi signals from other users.
The most powerful tool which helps to admin in your network based only on ARP protocol...........
- ARP is ADDRESS RESOLUTION PROTOCOL.... And this is mostly familiar witha word ARP Spoofing.
- Arp Spoofing is attack in which a malicious user sends a falsified messages over a LAN(Local Area Network).
Netcut is a tool which is used for spoofing with the connected network and it can cut the connections to the users to which they are connected to .....
Here we go,
Netcut is a solution that helps to admin your network based only on ARP protocol.
It can execute several tasks as list IP-MAC table in seconds, turn off & on network on any computer on your LAN including any device like router or switcher.
Netcut can also protect from spoofing. Netcut is easy to use.This is better than a hacking code. Hackers keeps on coding and stuffing big codes but , this Netcut can cut the connections which are connected to the same network to which we are connected too.
you can the link from the homepage in the site www.netcut.com. you can download according to your computer bit size (32 bit or 64bit). After you download and installation there will another application attached to this netcut and that application name is WinCap don't worry about it that was an installation which can interpret the Ip addresses of the computers which are connected to the same router.
As shown in the picture the interface of the Netcut will be as same as above. While coming to the use, the first ip address that was shown in the application was our router's address . The second ip address is our computer's ip address.
The above picture gives you a clarity about how to use . we need to cut all the connections after the first two ip addresses as discussed in the above paragraph. And while cutting the connections as per terminology of this application we need to select an ip address and push your cursor to "cut off" option and if you want to give the connection back to the user there's a "resume" option right behind. sometimes the application get struck and later it wont work that is because of load on the connections and numbers of users connected to the router. For that the simple solution is to exit the application and restart it .. that's it.
While starting up the application we need to start it as an administrator so that problems may be recovered. And also for every sequence of time users may increase or decrease according to time. For that there is an option to "refresh" so we can get the current users accordingly.
pros
- As many connections(ip addresses) can be cut off through this application.
- There is no limit of time for the cut off option.
- we can grab as much speed as we can by using.
- keep using it, this will give a comfort of using Internet.
Cons:
- performance issue-wise a slight problem cause of bugs issue.
- Don't use refresh button instantly .
- must use only as an administrator for recovery of problems.
Keep Surfing...................................................
0 comments:
Post a Comment